Products and Solutions Services Online Services Literature References Contacts Resource Center News and Events Career Opportunities About us
 
  Rotary Screw Compressors
  Oil-Free Rotary Screw Compressors
  Compressed Air Treatment
  Compressed Air Piping
  Controllers
  Engineered Solutions
  Sigma Air Utility
Blowers
  Applications
    Rotary Lobe Blowers
    Rotary Screw Blowers
  Receiver Tanks
  Portable Compressors
  Vacuum Packages
  High Pressure Boosters
  Premium Fluids
  Parts
  Industry 4.0
 
 
  

Rotary Blowers for Vacuum Applications

 

router table application
rotary lobe blower being used in router table vacuum application
Omega DB 236C rotary blower used in router table vacuum application

Router Table Vacuum 

Most router tables that handle sheet goods require vacuum pumps for product hold-down. The router table manufacturers often supply vacuum pumps for their tables that range from 15 - 50 hp. It is common that the capacity of the vacuum pump is less than the flow required to maintain the vacuum. When the work piece slips, the assumption is that a pump that can achieve higher vacuum is needed to correct the problem. What is really needed is a vacuum pump with a higher flow capacity. This is especially true with spoiler board applications.

When the sheet is first placed on the table, all of the holes in the table are covered and the flow needed to hold the vacuum is low. At this point there is sufficient vacuum to hold down the work piece. [A 4’ X 8’ sheet is 32 ft2. A vacuum of 15” Hg gauge is the same as 1,094 pounds pushing down on every square foot of the surface (a total force of 34,560 pounds!) and this is plenty of hold-down force.] As the work piece is cut away, more holes in the table are exposed, the pieces get smaller, and more flow is required to maintain the vacuum at the part. If the flow requirement exceeds the capacity of the pump, the vacuum degrades and the work piece can slip. This phenomenon occurs regardless of the vacuum capabilities of the pump. This is a flow issue – not a vacuum issue.

Oil-flooded vacuum pumps can require a lot of maintenance and be unreliable due to carryover of particulates from the process. These particulates can make their way to the pump and cause damage or failure. In many cases, operating the pump at reduced vacuum levels can lead to excessive oil carryover, which requires additional components to remove from the exhaust. If you have several router tables, the maintenance on all of the vacuum pumps can be very high. Where higher levels of vacuum are not required, a rotary blower can greatly simplify this process. When sized for higher capacities, the blowers can provide the needed vacuum for the table without the need for high-capacity inline filters or exhaust demisters. The additional pump capacity allows for the needed vacuum to be maintained at the part. Since the blower does not have oil in the air chamber, they are far less sensitive to contamination. For blowers, the recommended scope of supply for router table vacuum includes:

Vacuum Thermal Forming
With this process, a pattern is made to represent the inside surface of an object. The pattern is placed in a vacuum thermal forming the machine along with a thin sheet of plastic. The plastic is then heated to a temperature where it becomes very flexible and it is then lowered over the pattern. A vacuum system removes the air between the pattern and the plastic sheet and atmospheric pressure pushes the plastic down tightly over the pattern. After the formed piece cools, it is removed and trimmed. Sometimes low pressure air or compressed air is used to remove the work piece from the pattern. The vacuum requirement depends on the intricacy of the pattern and the material being formed. Vacuum as high as 27” Hg gauge is sometimes required.
 
Examples of vacuum thermal-formed products include:
  • Aeronautical interior trim panels, covers and cowlings
  • Agricultural seed trays, flower tubs, and animal containers
  • Architectural models
  • Automotive wheel covers, door interiors, bumpers, and shrouds
  • Molds for specialized chocolates
  • Enclosures for electronic equipment
  • Chair and seat backs
  • Dental castings
  • Packaging trays, blister pack, and skin pack products
  • Food trays, cups and fast food containers
  • Bathroom fittings, bathtubs, and shower surrounds

 

 
KAESER home Search Sitemap
More info
Looking for a Distributor?
Need parts or a manual?
Request a Quote
Kaeser Toolbox

 

hr-grey

phone icon for rlContact us at
450-971-1414


hr-grey

Follow our blog!

www.kaesertalksshop.com

We want your opinion!

Website Feedback

hr-grey

back top
Privacy Policy, Kaeser Compressors Canada Inc., info.canada@kaeser.com